- Date: January 25th 2008
- Author: Ivan
- Lunker Hunter Forum Member Keciga
Above: Handful of Stripers, Caught By Lunker Hunter Pro Staff Member Brian Mendenhall
How To Make Your Own Ghost Shrimp Pump
Here are all the parts you'll need.
Take the PVC test plug and the 2 extra washers and assamble them together, drill an apropreate hole according to your bolt of the test plug into the 3/4in cap.Make sure you don't drill the hole too big. Now put it together with the 3/4 in cap.
Take your 2in cap and drill a 1in hole in the middle.
Cut the 3/4in PVC tube to 33 1/2in and insert it into the 2in cap
Attach the T to the tubing.
Attach the test plug with the 3/4in cap to the tubing. Insert what you have so far into the 2in PVC tubing
.
Cut the 2in tubing in a 45degree angle on the bottom. the shortest part of the angled cut will measure 36in
Bring it all together and put the 2in cap on the 2in tubing. The 2 in cap is the only one that will not have PVC cement in case you need to adjust the plug.
Take two 3/4in caps and two pieces about 2in long and put them together.
Insert the two pieces ito the T
After you like the way everything fits together take your PVC cement and glue it to every cap and T except for the 2in cap.
